Why You Should Focus On Improving Outside Wood Burners

What You Need to Know About Outdoor Wood Burners

Outdoor wood burning stoves can be an efficient and cost-effective method of heating homes and businesses. They also help reduce the dependence on fossil fuels that are non-renewable and contribute towards a resilient energy strategy.

For efficient burning it is essential to use wood that has been well-seasoned. Unseasoned or green wood has higher moisture content and can create creosote buildup which reduces performance.

Efficient

Outdoor wood burners (OWBs) have been around for years and provide an energy efficient and environmentally friendly method to heat your home. The typical design of OWBs favors a slower, cooler fire which results in poorer combustion and a higher amount of smoke and creosote. These unburned fuels can lead to health problems and fire hazards. They also degrade the environment.

Furthermore the visible smoke that OWBs produce can cause neighbors to complain and lead to DEC (Department of Environmental Conservation) enforcement action. This kind of public relations issue can be a significant impact on the value of your property and may even lead to your OWB being shut down.

Crown Royal Stoves offers a range of EPA Certified outdoor wood furnaces known as the Pristine Gasification Series that utilizes technology to maximize combustion efficiency for a clean, smokeless burning. This is done with a negative-pressure air system that draws fresh, dry, heated, filtered air from the bottom, and then pushes it out through the chimney faster than traditional outdoor wood boilers. This is achieved by an exclusive design that uses an incredibly efficient multi-pass water-filled heat exchanger constructed of 409 Titanium Enhanced Stainless Steel.

When properly used when properly used, When properly used, the Pristine Series OWB achieves an efficiency of 99% for a cleaner and smoke-free fire. It uses less wood, and produces significantly fewer emission than traditional OWBs. It is essential to burn only dry, clean, and seasoned wood in order to maximize the performance of your OWB. Seasoning your wood for six months or a year prior to burning is recommended. This helps ensure a better, more energy efficient burn.

You can improve the efficiency of your wood-burning stove by executing each week a "dry burn". This method reduces creosote which improves boiler efficiency and extends the lifespan of your boiler. Lastly by adding a creosote remover stick every time you fill your stove, you can significantly reduce the amount creosote used. The product is available from Wisconsin Wood Furnace.

Clean

The soot particles left in the aftermath of burning wood can make a wood stove look very dirty. These are very hard to move If you notice any spots of soot build-up on the glass of your stove, you must clean them immediately. If the soot isn't removed, it will become hard and make it more difficult to remove. Using the right cleaning products for the job is crucial and you should also make sure you're not damaging the surface of the glass by using anything that could scratch it. This could result in an area of weakness that could shatter the glass when it's exposed to high temperatures.

Before you begin cleaning your wood stove, you must ensure that it is unlit and completely cool. Make sure to cover the area surrounding it with newspaper. This will prevent any ash spillage that can cause stains and marks on surfaces.

It could take as long as one year for the seasoning process of your stove to be complete, based on the quality of wood you select. The wood that is properly seasoned will not only burn more efficiently, but also produce less creosote. This is the kind of material that builds up on your chimney, decreasing its efficiency and creating the risk of fire. If you are using unseasoned wood or just beginning a new fire in your outdoor wood burner the best thing you can do is open the back door to the lower part and scoop out the ashes into a non-combustible container each week.

A sediment flush is recommended on your boiler every four years. This is a straightforward flush of five seconds from the bottom drain valve on your boiler. This will remove any sediment that has built up in the system, and will ensure that your boiler runs well.

After you've completed the sediment flush, it's time to clean the exterior of your outdoor wood burner. Before beginning, it is essential to cover the floor surrounding the stove with newspaper. It is also helpful to wear gloves and protective eyewear. You should also have a ash canister made of metal along with a scraping tool as well as shovel. To safeguard the refractory, you must lay down a cloth to protect it from damage as you scrape away ash and coal deposits.

Easy to Operate

Outdoor wood boilers (also known as outdoor furnaces and outdoor wood hydronic heating systems or outdoor wood heaters) are often misunderstood in spite of their acclaim. They were among the "it" trends of the 1990s, alongside mullet hairstyles. Unlike their cousin the EPA's popular wood stoves which are designed to burn at constant, low temperatures, these units use an increased fire rate and emit more smoke when they operate. Some local governments restrict or prohibit their use.

OWBs work best for homes with a high level of insulation. The smoldering, visible smoke is also a cause of complaint with neighbors, and has led to many OWBs being shut-down or being sued in the past. For OWBs dry wood with a lower moisture content is needed to function properly. Unseasoned or  modern wood burning stove  can reduce efficiency, cause creosote to build up and decrease the life of the burner. Drying wood takes time, and an instrument to measure moisture is a must for the homeowner.

small wood burning heater -stage wood gasification (OWGB) boilers, on the other hand, use a three-step process that utilizes more of the energy available in the wood. This results in less smoke. These kinds of furnaces are far more efficient than traditional OWBs and can be used with a wider range of fuel. Wood gasification boilers require dry, well-seasoned firewood. The majority of wood will season in the course of a year. Oak and other hardy trees could take up to two years. This is due to a lower water content and denser mass. This allows them retain heat for longer, thus increasing efficiency and decreasing pollution. The EPA's "Burn Wise" website and Cornell Cooperative Extension can help homeowners learn more about burning wood efficiently to minimize pollution to the air.

Low Maintenance

Modern outdoor wood stoves are designed to be eco-friendly. In contrast to indoor wood burners which produce significant smoke, modern outdoor furnaces burn efficiently and without the production of excessive carbon monoxide or heat. They also use less wood to produce the same amount of heat as traditional stoves.

Outdoor wood burners require significantly less maintenance than indoor wood burners and are more forgiving in regards to the moisture content of the wood. Outdoor wood burners are suitable for wood that has been properly "cured" or seasoned. This can take a year or more for certain kinds of wood. It is important to make use of a moisture meter to check the water content of your wood prior to loading.

During operation, it is necessary to regularly check the system for the build-up of creosote. Creosote, a by-product of combustion, can accumulate in the flue and chimney if they are not cleaned regularly. It can be removed using a special creosote removal product that is poured into the fire. Regularly cleaning the flue and chimney will eliminate dangerous creosote accumulations and improve efficiency.

Crown Royal Stoves developed a new airflow technology known as Negative Pressure Gasification to attain 99% efficiency in combustion. Our EPA certified Pristine Series outdoor wood furnaces utilize this technology to pull air from the bottom, forcing all of the gasses through an insulated water-surrounded secondary combustion chamber, which is easy-clean turbines for a smokeless and pollution free combustion.